Tips For Replacing a Window Handle
Switching the handle on your window is a simple project that can be completed in the at-home comforts of your home. Use these helpful tips to ensure a smooth operation and great looking finish.
Begin by removing the screw covers to expose the screws inside the uPVC window handle. Then, measure the length of the spindle to ensure that you get the right size replacement.
1. Take a measurement of the Spindle Length
When replacing a window handle, it's important to determine the dimensions of the spindle right. It could influence the tightness or looseness of the handle as well as whether the handle will lock correctly into the window frame. The spindle is a metal shaft that connects the handle to the lock on the window frame. The spindle can be either an industry standard cross-section of 8mm or the older 9mm versions. The current industry standard is 8mm however this wasn't always the case. When buying a new handle it is essential to verify the dimensions.
The easiest way to measure the spindle length is to take off the handle you have already installed This can be accomplished by turning it into the open position, then unscrewing the two screws (which could be hidden behind plastic caps that will require removal) that retain the handle. After removal, take a measurement from the base of the handle to the end of the spindle. This will provide you with the measurements you need to buy a new one.
There are many options when it comes time to choose the perfect window handle. From sleek chrome that fits into a modern home to traditional bronze with a burnished finish that looks stunning in restored Georgian rooms, or even the more classic Tudor cottages with curled mongoose tail latches. There are many options, but the most important thing is to pick the style that is appropriate to your home's decor.
Espag handles are typically fitted to uPVC window frames and are always the same size, with a 43mm centre. Cockspur handles are available in a variety of sizes, starting at 58mm up to 62mm. Cadenza window handles have an entirely different dimension due to their angle blade that operates the multi-point lock mechanism within the window.
When you are choosing a handle for your window it is important to consider the hand you use to open your door. Inline Espag handles can be used with right or left-handed windows. Cranked window handles are hand-operated and are only used on windows that open in only one direction.
2. Take the handle off
If the handle is damaged or just worn out or simply worn out, a window handle that is shattered can be a real pain. The good news is that replacing the uPVC window handle is a very easy task you can complete yourself. All you need are the most basic tools and a bit of time to complete the process.
First, you must open the window, and then ensure that it's not locked. Next, you need to remove the screws that are holding the handle in position. Once the screw caps are removed then you'll be able to take off the handle.
The handle is attached to a spindle within the window frame. It is fixed with a pin or a screw dependent on the kind of handle. The most commonly used types of handles are inline Espagnolette handles and cockspur handles. Both these types of handles are used on casement windows, which includes aluminium windows. They can be locked using a key to prevent unauthorised opening of the window from outside, or you can lock them by turning the handle clockwise.
To remove the handle you will require a flat-bladed screwdriver. When this clip is released the handle will slide off the spindle. After the handle has been removed, you'll have to measure the spindle length and make sure that the new handle is a good fit.
Once you have the right size, you are able to fix the new handle into place. It is important to make sure that the new handle is securely secured and that it is turning in the correct way (clockwise for open and counterclockwise for closed). It is also crucial to check that it isn't installed upside down.
In the end, you must replace the screw cap caps. After you've done this you can test the handle to make sure that it works properly. You can also test the locking mechanism by shifting the handle from the unlocked position to the locked and then back.
3. Remove the Screws
A uPVC handle is an important part of any house and is the first thing that shows signs of wear or damage. This could be due to natural factors or through frequent use, and sometimes malicious damage caused by opportunistic criminals who might wish to open a locked window and gain entry to your property. However, a simple repair can easily solve the problem and stop the problem from occurring again.
uPVC handles may also be difficult to remove if the locking mechanisms are not working properly. It's often possible to solve the issue by replacing the multipoint locking mechanism instead of the whole handle. This could help you save money.
Once you've removed the old handle you'll need to take off the screws that were holding it in place. The screws are typically located on the inside of the handle base. You may require a screwdriver to accomplish this and it's essential to not over tighten as this can cause the handle to loosen.
The next step is to locate the fixing pins or screws that hold the new handle in the correct position. These are usually located on the inside of the base of the handle. You'll need an instrument to remove them. If you want to replace them, you should replace the caps on the screw and test the handle to ensure it works correctly.
If you're ready to put in the new handle, simply line up the spindle with the cut out in the window mechanism and screw in the right position. If you're looking to replace the screws ensure that the handle is in a slack position and that any screws are securely fixed. You're done! Now you can enjoy the newly installed window handle. This should help you avoid expensive window and door replacements in the future. If door handle replacement basildon 'd like assistance regarding this or any other aspect of your uPVC windows don't hesitate to get in touch with us.
4. Fit the New Handle
Whether you're replacing a broken handle or simply changing it, the process is surprisingly easy and can be accomplished in just a few steps. The most important thing is to identify the type of handle, measure its spindle and know what tools you will need to complete the task. Always prioritise the safety of your windows and tools. It's also important to take your time and follow the steps carefully to ensure you have a working handle that is safe to use.
To begin, locate the screws that hold your window handle in place. Remove them while firmly holding the handle to prevent it from falling down and causing injury. Once the screws have been removed, you can place them in a safe location to be replaced later.
After removing the old handle, you can now begin to install your new one. The handle needs to be a perfect fit for it to function properly and hold the window in its closed position. Next move the square metal bar attached to the handle into the window mechanism hole.
Now that the new handle is in place, the final step is to replace the screw caps and verify that it works. If you are not satisfied with the results, or if your window does not open and close properly contact our experts for help.
Most homes in the UK have uPVC windows and as they are, a lot of them will have to be replaced at some point due to wear or breakage. The procedure is simple and can be done by anyone with some experience in DIY. The most important aspect in the success of the procedure is making sure you're using a handle that is compatible with your window's size and design. If you're unsure about what kind of handle you'll need, feel free to get in touch with our team who will be able to provide you with the choices available.